Inserting Batteries Into The Remote Control; Using The Remote Control To Operate The System - Philips MCM148 User Manual

Preparations
Inserting batteries into the Remote
Control
Open the battery compartment.
1
Insert two R03 or AAA batteries following the
2
indications (+/-) inside the compartment.
Close the cover.
3
1
2
10
3
Using the Remote Control to operate
the system
Aim the Remote Control directly at the remote
1
sensor (IR) on the front panel.
Do not put any objects between the Remote
2
Control and the system while operating the
system.
CAUTION!
– Remove batteries if they are exhausted or if
the Remote Control is not being used for a
long time.
– Do not use old and new or different types
of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed of properly.