Inserting Batteries Into The Remote Control; Using The Remote Control To Operate The System - Philips BTM630V37 Manual

Inserting batteries into
the Remote Control
1
Open the battery compartment.
2
Insert two R03 or AAA batteries following the
indications (+/-) inside the compartment.
3
Close the cover.
3
1
2
Using the Remote Control to operate
the system
1
Aim the Remote Control directly at the remote
sensor (IR) on the front panel.
2
Do not put any objects between the Remote
Control and the system while operating the
system.
CAUTION!
– Remove batteries if they are
exhausted or if the Remote Control is
not being used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
pg001-034_BTM630_37-Eng 13
Preparations
2007.6.14, 17:15
13