Advertisement
Manual for FP Board
(Pic1)
(Pic2)
If you choose to install with the double faced adhesive tape, please according to the following steps:
Put another two strip of double faced adhesive tapes onto the FP Board's base (like Pic3), tearing the red layer, and put the FP
Board onto the board or wall. You'd better to use your hands to press the FP Board to the flat surface about 20 seconds to make
sure it can be sticky strongly.
(Pic3)
4, Connect one end of USB Cable to the USB Port of Computer, and the other end to FP Board. Plug the power cable into FP Board.
USB and Power cable should be exclusive to the projection screen. Plug the hardkey into the USB Port of computer.
4
Advertisement
