Seconique Ventura Assembly Instruction Manual

VENTURA 3' BUNK BED ASSEMBLY INSTRUCTION
IMPORTANT-READ CAREFULLY-RETAIN FOR FUTURE REFERENCE
!
DO NOT
USE
SAFETY WARNING
-All bunk beds and high beds intended to be assembled by someone other than the manufacturer or their
representative shall contain assembly instructions a list of the parts supplied and details of any tools
required to assemble the bed;
-We recommend that you use the mattress at size: 1900*900*160mm.
-All assembly fastenings should always be tightened properly and that care should be taken that no fittings
are loose.
-Instructions regarding positioning and connection of the means of access.
-The ladder is not for playing on, only use to climb onto top bunk.
-We recommend only one person on the upper bunk at one time.
-Warning:High beds and the upper bed of bunk beds are not suitable for children under six years due to
the risk of injury from falls.
-Warning: -The bunk bed or high bed should not be used if any structural part is broken or missing.
-The top of the mattress shall be at least 160MM below the upper edge of the safety barriers.
-Warning: Children can become trapped between the bed and the wall to avoid risk of serious injury the
distance between the top safety barrier and the wall shall not exceed 75mm or shall be more than 230mm.-
-Warning: Bunk beds and high beds can present a serious risk of injury from
strangulation if not used correctly. Never attach or hang items to any part of the bunk bed that are not
designed to be used with the bed, for example, but not limited to
.
bags
- The ventilation of the room is necessary in order to keep the humidity low and to prevent mold in and
around the bed.
-The manufacturer' s instruction must be always followed.
-EN747-1&2:2012+A1:2015 TEST version.
TWO PEOPLE ARE NEEDED TO ASSEMBLE THIS BUNK.
DOMESTIC USE ONLY
IMPORTANT NOTICE
SO-45MM
ropes, strings, cords, hooks, belts and
SEC/SH/01/22/RJ2
PAGE 1