Table of Contents
Advertisement
Using Flash (Flash)
1.
In the REC mode, press [2] (
2.
Use [4] and [6] to select the flash
setting you want and then press [SET].
Auto Flash
>
Flash Off
?
Flash On
<
Soft Flash
_
Red Eye
¥
Reduction
3.
Press the shutter button to shoot.
A
< indicates the flash will fire.
• For information about Flash Range, see page 182.
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Soft flash always fires, regardless of exposure conditions
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject's eyes.
Back lamp
Flashes orange while the flash is charging to indicate that image
recording is disabled.
• You will not be able to take another flash snapshot until the lamp
stops flashing orange, which indicates that charging is complete.
) once.
[2] (
37
Flash
)
Snapshot Tutorial
Advertisement
Table of Contents
