Disinfectant; To Store A Transducer - VisualSonics Vevo 3100 User Manual

PN 51340 User Guide: Cleaning and Disinfecting Guide for the Vevo 3100
imaging system and MX series transducers Rev 1.0

Disinfectant

Anios Wipes
Aniosyme DD1 (5%)
Endosporine
Hydrogen Peroxide (3%)
Asepti Steryl
Clidox

To store a transducer

 The transducer may be stored in one of the holders along the sides of the Vevo 3100 Imaging
System with the nose pointing upward.
 Always ensure that the cable is not twisted when storing the transducer.
 Always use the supplied packaging to transport the transducer from one site to another.
Follow these guidelines when you store the transducer in the supplied packaging:
 Make sure that the transducer is clean and dry before you place it in the supplied packaging.
 Place the transducer in the supplied packaging carefully to prevent kinking of the cable.
 Avoid storing the transducer in areas of extreme temperatures or in direct sunlight.
 Store the transducer separately from other instruments to avoid inadvertent damage.
Active Ingredient
Quaternary Ammonium, Isopropyl Alcohol
Quaternary Ammonium
Glutaraldehyde
Hydrogen Peroxide
Orthophenylphenol, Para-tertiary Amylphenol, Ethanol
Chlorine Dioxide
Page 5 of 6