Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lumberjack PT254
Summary of Contents for Lumberjack PT254
- Page 1 PT254 10″ PLANER-THICKNESSER ORIGINAL INSTRUCTIONS...
-
Page 2: Table Of Contents
Installation…………………………………….5 Structure and Functions…………………….6-7 Supplementary Safety Instructions………..7 Operation Regulations………………………8-10 Maintenance…………………………………11 Attention …………………………………….11 Assembly Diagram and List………………..12-15 SPECIFICATIONS Model No PT254 Motor 1500W No. of Blade Cutterhead rpm 8500 min Weight 35/30 kg (39/34 kg with stand) Technical data-Planer Cutting Width(max) 254 mm (10″) -
Page 3: Safety Rules
SAFETY RULES: WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before attempting to operate this product and save these instructions. (1) Keep work area clear - Cluttered area and benches invite injuries. - Page 4 - Follow instruction for lubricating and changing accessories. - Inspect tool cords periodically and if damaged have them repaired by an authorized service facility. - Inspect extension cords periodically and replace if damaged. - Keep handles dry, clean and free from oil and grease. (15) Disconnect tools - When not in use, before servicing and when changing accessories such as blades, bits and cutters, disconnect tools from the power supply.
-
Page 5: Unpacking
SUPPLEMENTARY SAFETY INSTRUCTIONS ⑴ Regularly check the blades and lock bars are locked tight in cutterblock. ⑵ Max. allowable blade projection over cutterblock 1.0mm/0.004 inch +10%. ⑶ Never remove any of the machine’s safety guards other than for servicing and repair work. Keep guards operational at all times. -
Page 6: Structure And Functions
G．Short top frame H. Long top frame I. Short brace J. Long brace K. Leg L. 8mm flat washer M. M8X30 hex bolt N. M6 hex nut O. 6mm flat washer P. M6X12 carriage bolt Figure2 STRUCTURE AND FUNCTIONS The surface planer-thicknesser is a transportable electric tool. The machine is driven by a single-phase series motor, and it is double insulated. -
Page 7: Operation Regulations
Figure 4 WARNING: Improper connection of equipment grounding conductor can result in the risk of electrical shock. Equipment should be grounded while in use to protect operator from electrical shock. - Check with a qualified electrician if you do not understand grounding instructions or if you are in doubt as to whether the tool is properly grounded. - Page 8 Figure 5 CHIP EXTRACTION To ensure trouble free and reliable operation on enclosed premises, the machine must be connected to an extractor unit at the dust chute E (accessory) DUST CHUTE CONNECTION WHEN PLANING : - Lift up the blade guard arm F so that the longitude holes G being exposed; - Pull out the key H on both sides of the dust chute E;...
- Page 9 Figure 7 DUST CHUTE CONNECTION WHEN THICKNESSING: -Slide the fence to right side, and turn to 135° -Remove the blade guard K and place the dust chute E(See Figure 8). -The dust chute E is so positioned that both keys H are in line with the longitude holes G. Then push both keys H into the longitude holes G (See Figure 6).
-
Page 10: Maintenance
Figure 10 THICKNESSING -Set the desired height with handle assembly at spindle with reference to scale. 1 turn =3mm -Slide in narrow wood in the middle. When thicknessing the table must be lubricated regularly with lubricant. After having worked for a long period or when planing wet wood it may occur that the workpiece stops while pulling in. -
Page 11: Attention
Dirty feed-in rollers and feed-out rollers have to be cleaned. In order to prevent the motor from overheating, regularly check that no dust has accumulated on the ventilation apertures of the motor. After a prolonged period of operation, users are recommended to have the machine checked by an authorized customer service shop. - Page 12 ASSEMBLY DIAGRAM...
- Page 13 Old Heat h Road, Wolverhampton, WV1 2RP. Declare that the product: Designation: 1500W Planer Thicknesser Model: PT254 Complies with the following Directives: Electromagnetic Compatibility Directive - 2004/108/EC Machine Directive - 2006/42/EC Restrictions of the use of Hazardous Substances in Electrical Equipment - 2011-65/EU Waste Electrical and Electronic Equipment - 2012/19/EU Standards &...
- Page 14 LUMBERJACK TOOLS UNIT C MANDERS IND EST OLD HEATH ROAD WOLVERHAMPTON WV1 2RP UNITED KINGDOM WWW.LUMBERJACKTOOLS.CO.UK...
Need help?
Do you have a question about the PT254 and is the answer not in the manual?
Questions and answers