Lumberjack PR5KIT Safety And Operating Manual
  1. Manuals
  2. Brands
  3. Lumberjack Manuals
  4. Tools
  5. PR5KIT
  6. Safety and operating manual

Lumberjack PR5KIT Safety And Operating Manual

Handy paint roller
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

SAFETY AND OPERATING MANUAL
Handy Paint Roller
PR5KIT
ORIGINAL INSTRUCTIONS
PR5KIT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PR5KIT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lumberjack PR5KIT

Summary of Contents for Lumberjack PR5KIT

  • Page 1 SAFETY AND OPERATING MANUAL Handy Paint Roller PR5KIT ORIGINAL INSTRUCTIONS PR5KIT...
  • Page 2 QUICK START GUIDE Handy Paint Roller Push roller assembly over roller frame until it Thread handle collar on roller frame. Snap fill tube into the clamps of snaps into place. paint can clip. Clip the paint can clip onto paint can. Push fill valve down over fill tube until it Squeeze trigger to free up the bottoms on fill tube.

  • Page 3: Safety Guidelines - Definitions

    WARNING: To reduce the risk of injury, user must read and understand the instruction manual before using the Handy Paint Roller WARNING: Some paints contain chemicals known to cause cancer, birth defects or other reproductive harm. To reduce your exposure wear appropriate safety equipment such as face masks, gloves, and other appropriate protective equipment.
  • Page 4 • When leaving Handy Paint Roller unattended for a longer period of time, wrap roller in a plastic bag to prevent drying, removing as much air as possible from bag. • Make sure the type of paint you use can be cleaned with either mineral spirits (for oil-based paints) or a warm water and soap solution (for water soluble paints like latex).

  • Page 5: Helpful Hints

    2.) Clip the paint can clip onto paint can. Lubricate top of fill tube stem with a small amount of petroleum jelly included in carton. NOTE: For deeper containers like 5 gallon pails, fit a section of 3/4 inch I.D. (inner diameter) clear tubing over the ribs of the fill tube to extend it (fig.
  • Page 6 3.) When not in use rest the Handy Paint Roller on the kickstand (a). • When using kickstand, the Handy Paint Roller should always be on a drop cloth (b) or over newspaper in case of drips. • When painting, kickstand should be pointed away from roller to avoid getting spatter on kickstand.
  • Page 7 4.) Screw out part (a) from the roller core and remove the roller core. (fig. N). Empty any remaining paint. Remove the outer cap by inserting the roller frame into the roller and gently pushing the cap off (fig. O). Cleaning the Handy Paint Roller 1.) Remove the fill tube from the paint can clip and push it directly into the fill valve.
  • Page 8 Lubricating the Handy Paint Roller Lubrication helps with normal operation and should be done after cleaning and before each use. 1.) Turn the threaded assembly collar (a) near the trigger counterclockwise until the main tube assembly slides off. NOTE: When reassembling, black threaded collar (a) should be towards trigger handle.

Table of Contents