Contact Rating; Specifications - Panasonic AH1 Quick Start Manual

P/C board right angle terminal
Operating Force
Actuators
Pin plunger
Hinge lever
Simulated roller lever
Note: 1. Color of plunger
AgNi alloy contact type: white
AgNi alloy + Au-clad contact type: dark red
2. Please order addition 9 at the end of the part number for UL/C-UL products with safety standards.
P/C board left angle terminal
Operating Force
Actuators
Pin plunger
Hinge lever
Simulated roller lever
Notes: 1. Color of plunger
AgNi alloy contact type: white
AgNi alloy + Au-clad contact type: dark red
2. Please order addition 9 at the end of the part number for UL/C-UL products with safety standards.
3. Since the right angle and left angle are as shown in the photo below with the push plunger as the reference point, be careful not to make a mistake.
Right angle
RATING

Contact rating

(OF) 0.74 N type
AgNi alloy contact type
(OF) 1.47 N type
AgNi alloy + Au-clad contact type
Note) OF: Value of pin plunger

Specifications

Item
Mechanical life (OT) Specified value
Expected
life
Electrical (OT) Max.
Insulation resistance
Between non-continuous terminals
Dielectric Between each terminal and other
strength exposed metal parts
Between each terminal and ground
Contact resistance (Initial)
Vibration resistance (Pin pluger type)
Shock resistance (Pin plunger type)
Allowable operating speed (No load)
Max. operating cycle rate (No load)
Ambient temperature
Unit weight
Protection grade
Notes: 1. Test conditions and judgement are in accordance with NECA C 4505.
2. OF: Value of pin plunger type
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
AgNi alloy contact type
(OF) Max.
0.74 N
1.47 N
0.25 N
0.49 N
0.26 N
0.54 N
AgNi alloy contact type
(OF) Max.
0.74 N
1.47 N
0.25 N
0.49 N
0.26 N
0.54 N
Left angle
Standard rating
1 A 125 V AC, 1 A 30 V DC
3 A 125 V AC, 2 A 30 V DC
0.1 A 125 V AC, 0.1 A 30 V DC
AgNi alloy contact type
(at 20 cpm) (at rated load)
(by voltage drop, 1 A 6 to 8 V DC)
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening: Max. 1 msec)
AH1780
AH1760
AH1782
AH1762
AH1784
AH1764
AH1880
AH1860
AH1882
AH1862
AH1884
AH1864
(OF) 0.74 N type: Min. 10
(OF) 1.47 N type: Min. 5 × 10
Min. 3 × 10
4
Min. 100 MΩ (at 500 V DC)
600 Vrms for 1 min
1,500 Vrms for 1 min
1,500 Vrms for 1 min
Max. 30 mΩ
Min. 294 m/s (Contact opening: Max. 1 msec)
2
1 to 500 mm/sec
120 cpm
–25 to +85°C (no freezing and condensing)
Approx. 0.5 g
IP40
ー 3 ー
Panasonic Corporation 2022
AH1 (FJ) Switches
AgNi alloy + Au-clad contact type
AH178061
AH176061
AH178261
AH176261
AH178461
AH176461
AgNi alloy + Au-clad contact type
AH188061
AH186061
AH188261
AH186261
AH188461
AH186461
Minimum applicable load
—
—
5 mA 6 V DC, 2 mA 12 V DC, 1 mA 24 V DC
AgNi alloy + Au-clad contact type
(at 60 cpm)
6
(at 60 cpm)
5
Min. 10
5
(at 20 cpm) (at rated load)
Max. 100 mΩ
(by voltage drop, 0.1 A 6 to 8 V DC)
AECTB15E 202203