Page 1
Detector switch - PIR HD/HC/HS4434 - L/N/NT4434N - AM5434 Description Front view This device enables a light source to be controlled automatically by detection of movement in the monitored area. Movement detector and daylighting measurement with 180° detection angle. Detection type: infrared (PIR)
Page 2
TECHNICAL SHEETS HD/HC/HS4434 - L/N/NT4434N - AM5434 Installation Positioning the detector The detector must be positioned in such a way that it is not disturbed 2,5 m by the artificial light that is already present in the ≥ 2,5 m room.
Page 3
HD/HC/HS4434 - L/N/NT4434N - AM5434 Detection system: Retrigger: In manual mode. Function allowing automatic switch-on of the product Initial detection: The load is switched on as soon as the first detection occurs if the after a period of 30 seconds following the load being switched off.
Page 4
TECHNICAL SHEETS HD/HC/HS4434 - L/N/NT4434N - AM5434 Maintenance Standards Keep the lens clean. Directive: Clean the surface with a cloth. Installation standards: NFC 15-100 Do not use: acetone, tar-removing cleaning agents or trichloroethylene. Product standards: IEC 60669-2-1 Maintenance with the following products: - Hexane (En 60669-1)