Charging The Tool; Unpacking And Set-Up - RADLEY 1280-008 Owner's Manual

Voltage Rating: 4V DC
Rated Speed: 5,000, 10000, and
15,000/min
Collect Size: 3/32", 1/8"
Battery: 600mAh Li-ion, Built-in

CHARGING THE TOOL

Insert USB charging cable output end
into the USB charging port on the rotary
tool, then plug power adapter into the
120VAC standard power outlet.
CHARGING LED INDICATORS
Charging - Red LED Light
Fully Charged - Green LED light

UNPACKING AND SET-UP

CHANGING ACCESSORIES
1. Press and hold the locking knob, then
turn the chuck until the button is fully
pushed in.
Note: Ensure that the rotating part is fully
stopped.
2 When the rotating part is clicked in,
turn the locking knob down and pull
the parts/bits out from the tool.
3. Insert the new accessories into the
chuck, then fix the screw on while
pushing the locking knob.
4 Finally, release the locking knob.
9
SPECIFICATIONS
Charger Output: 5V/0.5-2A (Micro USB)
Charging Time: 2-3 hours
Max running time at no load: 4 hours
Weight: 0.25 lbs