Tv And Remote Control - Philips 40PFL8664H User Manual

6.2 TV and remote control
The TV does not switch on
• Verify the power cable connection.
• Verify that the batteries of the remote control are not
empty or weak. Verify their + / - orientation.
• Unplug the power cable, wait for a minute and plug it
back in. Try switching it on again.
• You can use the buttons on the TV to switch the TV on.
The TV does not respond to the remote control
• Verify that the batteries of the remote control are not
empty or weak. Verify their + / - orientation.
• Clean the remote control and TV sensor lens.
• Verify if EasyLink Remote control is set to Off
• During the warming-up time of the TV, which is about
two minutes, it is possible that the TV and some external
devices do not immediately respond to commands from
the remote control. The device is functioning normally and
is not broken.
...
1/2