Philips 40PFL8664H User Manual page 153

4.4.2 With a USB memory device
3 Download from USB to TV
Insert the USB memory device back into the TV. Follow the
onscreen instructions to start the new TV software update.
The TV switches off for 10 seconds and back on again.
Please wait.
Do not ...
• use the remote control
• remove the USB device from the TV during the software
update
If a power cut occurs during the update, never remove the
USB memory device from the TV. When the power returns,
the update continues.
At the end of the update, the message Operation
successful appears on screen. Remove the USB device and
press O on the remote control.
Do not ...
• press O twice
• use the O switch on the TV
The TV switches off (for 10 seconds) and back on again.
Please wait.
Now the new TV software update is finished.
You can use the TV again.
3/3