Channel List - Philips 32PFL5405H User Manual


[Add your devices]: Adds new devices
to the home menu. Note that you must
add a new device to the home menu,
in order to access it.

[Setup]: Accesses menus that allow you
to change picture, sound and other TV
settings.
Browse
NonPu blish
The browse menu gives you easy access to:

Electronic program guide

TV channel list

Teletext
To access the browse menu, while watching
TV, press .
1. Press the Navigation buttons to select an
item:

[Programme guide]: Accesses the
Electronic Program Guide.

[Channel list]: Accesses the TV channel
list.

[Text]: Accesses teletext.
2. Press OK to confirm your choice.
Experience
Press to access the experience menu,
which provides a range of frequently-used
settings.
The experience bar menu gives you easy
access to:
EN 18

[Picture format]: Changes the picture
format.

[Smart picture]: Frequently-used
picture settings.

[Smart sound]: Frequently-used sound
settings.

[Speakers]: Configure TV speakers for
Philips EasyLink.

[Picture shift]: Adjusts the position of
the picture.

Channel list

NonPu blish
The channel list displays the TV channels and
possible radio stations installed on your TV.
1. While watching TV, press
2. Select [Channel list], then press OK.
3. Select a channel, then press OK to access
the channel.
4. Press to exit the channel list without
changing the channel.
Add your devices
NonPu blish
After you connect a device to the TV, add
this device in the home menu for easy
access.
In the home menu, select [Add your
devices], then press OK. Follow the
instructions on-screen to add the device to
the home menu.
To remove a device from the home menu,
select the item, press
[Remove this device]. Press OK.
Setup
NonPu blish
[Setup] in the home menu allows you to
change most of the TV settings, including:

Picture or sound settings

Installation or update of TV channels

Update of TV software

Other special features
1. In the home menu, select [Setup], then
press OK.
2. Select an item with the Navigation
buttons, then press OK:
.
and select