Power Management; Automatic Powersaving - Philips 273E3L User Manual

5. Power Management

5. Power Management

5.1 Automatic PowerSaving

If you have VESA DPM compliance display card
or software installed in your PC, the monitor can
automatically reduce its power consumption when
not in use. If an input from a keyboard, mouse or
other input device is detected, the monitor will
'wake up' automatically. The following table shows
the power consumption and signaling of this
automatic power saving feature:
273E3L
Power Management Definition
VESA Video H-sync V-sync
Mode
Active ON Yes
Sleep OFF No
(Standby)
Switch Off OFF -
273E3LH
Power Management Definition
VESA Video H-sync V-sync
Mode
Active ON Yes
Sleep OFF No
(Standby)
Switch Off OFF -
The following setup is used to measure power
consumption on this monitor.
Native resolution: 1920 x 1080
Contrast: 50%
Brightness: 300 nits
Color temperature: 6500k with full white pattern
Note
This data is subject to change without notice.
Power Used
Yes <27 W (typ.)
No < 0.5 W
- < 0.5 W
Power Used
Yes <27.3 W (typ.)
<32.3 W (max.)
No < 0.5 W
- < 0.3 W
LED color
White
White
(blink)
OFF
LED color
White
White
(blink)
OFF
22