Preparing The Device For The First Use; Connecting The Appliance Electrically; Getting To Know Your Device; Device - Siemens KG N Series Manual

4.4 Preparing the device for the
first use
Remove the information material.
1.
Remove the protective film and transport
2.
safeguards, eg adhesive strips and
cardboard.
Cleaning the device for the first
3.
time. Page 100
4.5 Connecting the appliance
electrically
Insert the mains plug of the mains
1.
cable of the device into a socket
in the vicinity of the device.
The connection data of the device
can be found on the type plate.
→ fig. †
1
6
Check the mains plug for tightness.
2.
aThe appliance is now ready for use
use.
5 Getting to know your appliance
nen

5.1 Device

Here you will find an overview of the
components of your device.
→ fig.
1
a
Cooling compartment → Page 97
B
Freezer compartment → Page 98
1

Control panel

→ Page 93
2
Relief
3
Bottle rack → Page 94
4
Storage drawer → Page 94
Getting to know your deviceNL
5
Fruit and vegetable drawer
→ Page 94
6
Type plate → Page 107
7
freezer drawer → Page 101
8
Leveling foot
9
Door rack for large bottles
→ Page 94
Remark:Differences between your
device and the images may be based
on equipment and size.
5.2 Control panel
You can set all functions of your
device and obtain information about
the operating status via the control
panel.
→ fig.
2
1
switches the
warning signal off.
2
freeze in or out.
3
len in or out.
4
Shows the set temperature of the
freezer compartment in °C.
5
Shows the set temperature of the
refrigerator compartment in °C.
6
switches the device on
in or out.
switches Super-
switches Supercow
93