Lab-T GrandCom-900 User Manual page 9

3.3 [RP] Repeater Mode
Ideally located Master unit relays each user's talking to minimize the
impact of surrounding obstacles
3.3.1 Operation Mode
ID of the device is assigned from 00~07, A (Any one), L (Listen Only), 08.
Refer to Table 3 below
Master
ID
/Slave
Master
00
Slave
01
Slave
02
Slave
03
Slave
04
Slave
05
Slave
06
Slave
07
Slave
A
Slave
L
Slave
08
DCX-P400 User's Manual
Table 3 Operation Mode
ID Status
Fixed TX/RX of ID 0
Fixed TX/RX of ID 1
Fixed TX/RX of ID 2
Fixed TX/RX of ID 3
Fixed TX/RX of ID 4
Fixed TX/RX of ID 5
Fixed TX/RX of ID 6
Fixed TX/RX of ID 7
ID8 ; Shared
Listen Only
Fixed TX/RX of ID 8
Explanation
Must exist in each group
Full duplex simultaneous communication between
the members
Full duplex simultaneous communication between
the members
Full duplex simultaneous communication between
the members
Full duplex simultaneous communication between
the members
Full duplex simultaneous communication between
the members
Full duplex simultaneous communication between
the members
Full duplex simultaneous communication between
the members
Unlimited, Can listen to other members' conversation,
Can talk by pressing the Talk button
Unlimited, Can listen to other members' conversation
Full duplex simultaneous communication between
the members, Should not use A when setting the
device
page 9