Operation Mode - Lab-T GrandCom-900 User Manual

3. Four Mode
3.1 [ST] 9+any one Mode
9 xed user + any one out of the participants talking together
simultaneously

3.1.1 Operation Mode

ID of the device is assigned from 00~08, A (Any one), L (Listen Only), 09.
Refer to Table 1 below
Master
ID
/Slave
Master
00
Slave
01
Slave
02
Slave
03
Slave
04
Slave
05
Slave
06
Slave
07
Slave
08
Slave
A
Slave
L
Slave
09
DCX-P400 User's Manual
Table 1 Operation Mode
ID Status
Fixed TX/RX of ID 0
Fixed TX/RX of ID 1
Fixed TX/RX of ID 2
Fixed TX/RX of ID 3
Fixed TX/RX of ID 4
Fixed TX/RX of ID 5
Fixed TX/RX of ID 6
Fixed TX/RX of ID 7
Fixed TX/RX of ID 8
ID 9 ; Shared
Listen Only
Fixed TX/RX of ID 9
Must exist in each group
Full duplex simultaneous communication
between the members
Full duplex simultaneous communication
between the members
Full duplex simultaneous communication
between the members
Full duplex simultaneous communication
between the members
Full duplex simultaneous communication
between the members
Full duplex simultaneous communication
between the members
Full duplex simultaneous communication
between the members
Full duplex simultaneous communication
between the members
Unlimited, Can listen to other members' conversation,
Can talk by pressing the Talk button
Unlimited, Can listen to other members' conversation
Full duplex simultaneous communication between the
members, Should not use A when setting the device
Explanation
page 7