How To Use - Lab-T GrandCom-900 User Manual

4. How to Use

4.1 Functions
There are 2 operation modes, NORMAL mode and SETTING
mode. The default mode is NORMAL when turn on the power.
Long press MODE button to go to setting mode. Setting values are
shown in the order of GROUP-> ID-> SIDE TONE-> MIC GAIN ->
SEC CODE -> MODE change as shown in Figure 1.
Can see the setting modes in order when short press the MODE
button.
Long press MODE button to go to SETTING mode to change the
setting values such as Channel and ID.
DCX-P400 User's Manual
Figure 1
Group
GRP
ID
SIDE TONE
S1~5/SF
MIC GAIN
(C1~C8)
SEC CODE
(30~3F)
(20~2F)
(10~1F)
(00~0F)
MODE SETTING
(4 MODE)
VOX
(A0~A4, AF)
page 11