Table of Contents
Advertisement
Push the water drain hose onto
3.
the connection as far as it will go.
Emptying the condensed water container
4.
→ Page 33 †
Remove the stopper from the
5.
bottom.
Set up and connectNL
Insert the stopper into the recess
6.
in the top.
Push in the condensed water
7.
container → Page 34 †
Connect the appliance to the
8.
water outlet.
→
†Connection types for water
drainage", page 15
Tip:To collect the condensed water
again in the condensed water
container (e.g. if the location of the
device is changed), undo these steps
in reverse order.
Connection types for water drainage
PAY ATTENTION!
With a clogged or closed drain,
accumulated waste water can flow
back into the unit.
Before using the device, ensure
▶
that the waste water drains quickly
and clears blockages.
Drain in a
siphon.
The connection position
tie with a
hose clamp
(12-22 mm) bore
gene.
the water
feeding hose with
a hose guide
thing on minimum
80 cm and maximum
15
Advertisement
Table of Contents
