Advertisement
Mount UM1 to Display
Hardware Selection
a. Consult the supplied Hardware Cross Reference List.
b. Select the mounting hardware for your display.
Attach UM-1 to Display
a. Position the UM-1 over back of display.
b. Thread mounting screws through square washers and spacers (if
required), as shown.
c. Thread mounting screws through slots on side rails into landed
inserts, and secure loosely.
d. With mounting screws installed, center UM-1 on the back of the
display, and then tighten all screws securely.
CAUTION: Do not use power tools or over-tighten the mounting screws.
Install Mounting Rails
1. Remove slider retaining screws as shown.
2. Remove sliders from channels.
3. Select required side rail size:
Medium rail – up to 17 1/8" height of landed inserts
Large rail – up to 25" height of landed inserts
4
Advertisement
