First Ring; Auto Clock; Register The Handsets - Philips CD480 User Manual

Set the dial mode
1
Select [Menu] >
press [OK] to confirm.
2
Select a dial mode, then press [OK] to
confirm.
» The setting is saved.
Note
• If your phone is in pulse dial mode, press *
during a call for temporary tone mode. Digits
entered for this call are then sent out as tone
signals.

First ring

If you have subscribed to the caller ID service
with your service provider, your phone can
suppress the first ring before the caller ID
displays on the screen. After the phone is
reset, it can detect automatically if the caller ID
service is subscribed and start to suppress the
first ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off], press [OK] to confirm.
» The setting is saved.
Note
•
To reset the first ring status, go to the reset
menu.
> [Dial mode], then
> [First ring], then

Auto clock

Note
•
This service is network dependent.
Note
•
Ensure you have the caller ID service before you
have this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, ensure the current year is set.
Set the Auto clock on/off
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off], press [OK] to confirm.
» The setting is saved.
Note
•
To reset the first ring status, go to the reset
menu.

Register the handsets

You can register additional handsets to the base
station. The base station can register up to 5
handsets.
> [Auto clock], then
EN
31