Base station (CD485) Charger Handset Base station (CD480) Power adapter Line cord User manual Quick start guide Guarantee Note In multi-handset packs, there are additional handsets, chargers and power adapters. In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket.
Connect Connect the base station Power Telephone Power socket socket socket Telephone base station 1 Connect each end of the power adapter to: • the DC input jack at the bottom of the base station; • the power socket on the wall. Power 2 Connect each end of the line cord to: adapter...
Get started Configure your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 When using your phone for the first time, you see a welcome message (country dependent). 3 Please set the country and language if prompted. 4 Set the date and time.
Charge your phone Charge 8 hours Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear a docking sound. » The handset starts charging. Note Charge the batteries for 8 hours before first use. Check the battery level When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low).
Enjoy Call • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. • To end a call, press Adjust the earpiece volume Press to adjust the volume during a call. Add a contact in the phonebook 1 Press 2 Select [Option] >...
Listen to messages recorded on the answering machine (for CD485 only) Switch on/off the answering machine: Press Start/Stop listening to the recorded messages: Press Adjust the volume: Press Skip backward: When you listen to the messages, press message from the beginning. During the first second of the current message, press to listen to the previous message.