Table of Contents
Advertisement
Quick Links
P a g e
| 1
PRODUCT MODEL NUMBER:
TL-9296S HDMI TO IP
MULTI CHANNEL ENCODER
ABOUT THIS
MANUAL
DISCLAIMER
No part of this document may be reproduced in any form without the written permission of the copyright
owner.
The contents of this document are subject to revision without notice due to continued progress in
methodology, design and manufacturing. TRANSLITE GLOBAL LLC shall have no liability for any error or
damage of any kind resulting from the use of this document.
COPY WARNING
This document includes some confidential information. Its usage is limited to the owners of the
product that it is relevant to. It cannot be copied, modified, or translated in another language
without prior written authorization from TRANSLITE GLOBAL LLC
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TransLite TL-9296S
Summary of Contents for TransLite TL-9296S
- Page 1 The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. TRANSLITE GLOBAL LLC shall have no liability for any error or damage of any kind resulting from the use of this document.
-
Page 2: Table Of Contents
P a g e INDEX TABLE OF CONTENTS Chapter 1 INTRODUCTION ........................3 1.1 P ..........................3 RODUCT VERVIEW 1.2 K ............................3 EATURES 1.3 S ........................... 4 PECIFICATIONS 1.4 P ..........................5 RINCIPLE HART 1.5 A ......................6 PPEARANCE ESCRIPTION Chapter 2 INSTALLATION GUIDE... -
Page 3: Chapter 1 Introduction
INTRODUCTION PRODUCT OVERVIEW TL-9296S multi-channel encoder is a professional HD/SD audio & video encoding device. It has 16/24 HDMI inputs where 8 HDMI ports share one encoder module with each module supporting 1MPTS and 8SPTS output. Its high integration and cost-effective design make the device widely used in varieties of digital distribution systems such as cable TV digital head-end, digital TV broadcasting, etc. -
Page 4: Specifications
P a g e SPECIFICATIONS Input 16 HDMI inputs (TL-9296S - 16); 24 HDMI inputs (TL-9296S - 24) Video Input Resolution 1920×1080_60P, 1920×1080_60i, 1920×1080_50P, 1920×1080_50i, 1280×720_60P, 1280×720_50P, 720 x 576_50i,720 x 480_60i Output Resolution 1920×1080_30P, 1920×1080_25P, 1280×720_30P, 1280×720_25P, 720 x 576_25P, 720 x 480_30P Encoding MPEG-4 AVC/H.264... -
Page 5: Principle Chart
P a g e System Function Network management (WEB) English language Ethernet software upgrade General Dimension(W×L×H) 440mm×324mm×44mm 0~45℃(work)；-20~80℃（Storage） Environment Power requirements AC 110V± 10%, 50/60Hz, AC 220 ± 10%, 50/60Hz PRINCIPLE CHART... -
Page 6: Appearance And Description
P a g e APPEARANCE AND DESCRIPTION Front Panel Illustration 1U chassis (three encoder modules) illustration： Run and Power indicators for 3 modules NMS (Network Management Port) Data Port (for IP Signal Output) Rear Panel Illustration Grounding Pole Power Switch and socket Module 1: HDMI 1-8 Module 2: HDMI 9-16... -
Page 7: Chapter 2 Installation Guide
ACQUISITION CHECK When users open the package of the device, it is necessary to check items according to packing list. Normally it should include the following items: ➢ TL-9296S Multi-Channel Encoder ➢ User’s Manual ➢ Power Cord ➢... -
Page 8: Device S Installation Flow Chart
P a g e DEVICE’S INSTALLATION FLOW CHART ENVIRONMENT REQUIREMENT Item Requirement When user installs machine frame array in one machine hall, the distance Machine Hall between 2 rows of machine frames should be 1.2~1.5m and the distance Space against wall should be no less than 0.8m. Electric Isolation, Dust Free Volume resistivity of ground anti-static material: 1X107~1X1010... -
Page 9: Grounding Requirement
P a g e GROUNDING REQUIREMENT ➢ All function modules’ good grounding is the basis of reliability and stability of devices. Also, they are the most important guarantee of lightning arresting and interference rejection. Therefore, the system must follow this rule. ➢... -
Page 10: Wire's Connection
When the device adopts united way, the grounding resistance should be smaller than 1Ω. Caution: Before connecting power cord to TL-9296S Multi-Channel Encoder, user should set the power switch to “OFF”. SIGNAL CABLE CONNECTION The signal connections include the connection of input signal cable and the connection of output signal cable. -
Page 11: Network Cable Illustration (Cat5)
CHAPTER 3 OPERATION TL-9296S does not support front buttons and LCD, users can only control and set the configuration in computer by connecting the device to web NMS Port. User should ensure that the computer’s IP address is different from the TL-9296S IP address; otherwise, it would cause IP conflict. -
Page 12: Operation
P a g e | 12 Connect the PC (Personal Computer) and the device with net cable and use ping command to confirm they are on the same network segment. I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 0 to 255 except 252 to avoid IP conflict). - Page 13 Click this button to apply the modified parameters. Parameters → IP Stream TL-9296S supports TS to output in IP (1MPTS and 8 SPTS for each encoder module) format through the DATA port. When users click “IP Stream”, it will display the interface as Figure-4 where to set IP out...
- Page 14 P a g e | 14 Click pen icon to edit IP output parameters Figure-4 Parameters →OSD Clicking “OSD”, it will display the interface where to configuration the OSD parameters as Figure-5/6/7.
- Page 15 P a g e | 15 Select to configure logo, caption or QRcode Select program1-8 to apply the logo insertion, or you can select “all” to apply all programs Click here to confirm the LOGO you selected Browse and select the Logo which has Put your logo everywhere been created...
- Page 16 P a g e | 16 Put the QR code everywhere Input the QR code URL here Browse and select the QRcode which has been created Figure-7 System→ Network: Clicking “Network”, it will display the interface as Figure-8 where to set NMS and DATA parameters.
- Page 17 P a g e | 17 System → Account: Clicking “Account”, it will display the screen as Figure-9 where to set the login account and password for the web NMS. Both the current username and password are “admin”. Figure-9 System → Configuration: Clicking “Configuration”, it will display the screen as Figure-10 where to save/ restore/factory set/ backup/ load your configurations.
- Page 18 P a g e | 18 System → Firmware: Clicking “Firmware”, it will display the screen as Figure-11 where to update firmware for the encoder. Figure-11 System → Date/Time: Clicking “Date/Time”, it will display the screen as Figure-12 where to set date and time for the device.
-
Page 19: Chapter 4 Troubleshooting
CHAPTER 4 TROUBLESHOOTING All Translite Global’s products have been passed the testing and inspection before shipping out from factory. The testing and inspection scheme already covers all the Optical, Electronic and Mechanical criteria which have been published by Translite Global. To prevent potential hazard, please strictly follow the operation conditions. -
Page 20: Chapter 5 Packing List
Device was suffered from physical damage ➢ Longtime idle. ➢ After switching on and restoring to factory setting, device still cannot work properly. ➢ Maintenance needed CHAPTER 5 PACKING LIST TL-9296S Multi-channel Encoder HDMI Cables 16/24 pcs as per HDMI interfaces numbers Power cord... -
Page 21: Chapter 5 Order Guide
P a g e | 21 CHAPTER 5 ORDER GUIDE TL-9296S 16 HDMI Inputs TL-9244S 24 HDMI Inputs...
Need help?
Do you have a question about the TL-9296S and is the answer not in the manual?
Questions and answers