Download Print this page

enware Ifo Sign Junior Toilet-S Trap Installation And Maintenance Instructions Manual

Advertisement

Quick Links

Ifo Sign Junior Toilet – S Trap
Installation and Maintenance Instructions
I00126_Version 2.0__10Jun22
1300 369 273 | info@enware.com.au
enware.com.au
The more
stars the more
water efficient
WATER RATING
www.waterrating.gov.au
3.3
4.5 L per full flush / 3 L per half flush
AS1172-1
WM-040187
litres
average flush

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ifo Sign Junior Toilet-S Trap and is the answer not in the manual?

Questions and answers

Summary of Contents for enware Ifo Sign Junior Toilet-S Trap

  • Page 1 Ifo Sign Junior Toilet – S Trap Installation and Maintenance Instructions The more stars the more water efficient WATER RATING www.waterrating.gov.au litres average flush 4.5 L per full flush / 3 L per half flush AS1172-1 WM-040187 I00126_Version 2.0__10Jun22 1300 369 273 | info@enware.com.au enware.com.au...
  • Page 2 Installations not complying with AS/NZS 3500, the PCA or the manufacturer’s instructions may void the product and performance warranty provisions. Enware Australia advises:1. Due to ongoing Research and Development, specifications may change without notice; 2. Component specifications may change on some export models.
  • Page 3 Distance from finished wall 30mm to back of pan Distance from finished wall 100mm to centre of outlet Min 100 Finished wall 50 –70 Ø 100 DWV Finished Floor Pan outlet www.enware.com.au Call 1300 369 273...
  • Page 4 Apply silicone sealant to the entire bottom contact surface of pan and around the perimeter, to achieve good adhesion and to create a strong bonding between the pan and the floor. Install pan into position. Call 1300 369 273 www.enware.com.au...
  • Page 5 Ensure no gap is left that can let any moisture to get through inside the base of the pan. Do not use the toilet until the silicone bed has cured. Let the silicone sealant dry for at least 24 hours before use. www.enware.com.au Call 1300 369 273...
  • Page 6 Cover Screw Rod by opening the flush button and releasing the tablet in the blue Cover Screw Max. 1 Rod, as illustrated. The tablet produces a fresh odour and cleaning effect on the whole bowl and colour. Call 1300 369 273 www.enware.com.au...
  • Page 7 To access the internal components of the cistern, first lift the flush button, then unscrew Cover Screw Rod. Next, unscrew the cistern fixing screws, and lift the ceramic shroud off the pan. www.enware.com.au Call 1300 369 273...
  • Page 8 Flush Volume The flush volume is fixed at 4.5L for full flush and 3.0.L for half flush. Flush volume is not adjustable on this product. Call 1300 369 273 www.enware.com.au...
  • Page 9 7 in reverse order. The screws for the cistern mounting must be tightened alternately to a maximum torque of 2.5 Nm. The cover screw should be tightened to a maximum torque of 1 Nm. www.enware.com.au Call 1300 369 273...
  • Page 10 Water leaks at water inlet Inlet connection is not Use loose nut extension fitting connection to cistern sealed properly supplied (IFOS-009) on the inlet connection. For further assistance, call Enware on 1300 369 273. Call 1300 369 273 www.enware.com.au...
  • Page 11 Ifo S-Trap Pan Back Inspection Opening IFO733 Cover Plug -Soft Fresh Sticks Blue (Pack of 5) IFO94690 Ifo Cistern Key with Hex and T25 Torx IFO91960 Loosenut Extension 1/2” BSP for inlet con- IFOS-009 nection www.enware.com.au Call 1300 369 273...
  • Page 12 All notifications and accompanying forms must be sent to us marked for the attention of the Enware Except as provided or referred to in this document, Australia Pty Limited, 9 Endeavour Road, Caringbah we accept no other or further liability for any NSW 2229.