Playing Music - Garmin FUSION APOLLO RA770 Quick Start Manual

3 From the music app or program, select
stereo.
4 If necessary, start playing music on the app.
The stereo changes to the AirPlay source automatically and plays audio
from your Apple device.
NOTE: If your Apple device is using AirPlay 2 software, you can connect to
multiple stereos on the same network.
NOTE: You cannot stream the AirPlay source to other stereos on the
network using the Fusion PartyBus network. Using AirPlay 2 software, you
can play content on multiple stereos on the network, but the stereos must
not be grouped.
NOTE: On some AirPlay devices, adjusting the volume on the device affects
the volume level on the stereo.
Configuring a Wireless Access Point for Apple AirPlay
For the best results when using Apple AirPlay, you should set up this stereo as a
wireless access point and connect to it using your compatible Apple device.
NOTE: By default, Wi‑Fi is off on the stereo.
®
1 From the stereo screen, select
POINT.
2 Write down the SSID and PASSWORD.
3 Select SAVE.
4 Connect your Apple device to the stereo wireless access point using the
SSID and PASSWORD.

Playing Music

Setting the Tuner Region
You must select the region you are in to receive AM and FM stations properly.
If you are connected to a compatible SiriusXM
a subscription (USA only), you must select the region you are in to receive
SiriusXM stations properly.
Quick Start Manual
or , and select the name of the
> SETTINGS > NETWORK > WI-FI ACCESS
tuner and antenna, and have
®
NOTE: SiriusXM service is not available in all regions.
You must select the region you are in to receive DAB stations properly.
NOTE: DAB stations are not available in all regions.
1 Select > SETTINGS.
2 Select TUNER REGION.
3 Select the region you are in.
Changing the Radio Station
1 Select an applicable source, such as FM.
2 Select to select a tuning mode.
You can use AUTO mode to scan stations, MANUAL mode to manually tune
to a station, and PRESET mode to select the next preset station.
3 Select or to tune to the station.
TIP: You can quickly save the selected station or channel as a preset by
holding .
Scanning for DAB Stations
NOTE: Because DAB signals are broadcast in select countries only, you must
set the tuner region to a location where DAB signals are broadcast.
1 Select the DAB source.
2 Select to scan for available DAB stations.
When scanning is complete, the first available station in the first ensemble
found begins playing.
NOTE: After the first scan is complete, you can select
for DAB stations. When the re-scan is complete, the system starts playing
the first station in the ensemble you were listening to when you started the
re-scan.
SiriusXM Satellite Radio
Only SiriusXM brings you more of what you love to listen to, all in one place.
Get over 140 channels, including commercial-free music plus the best sports,
news, talk, comedy and entertainment. Welcome to the world of satellite radio.
DRAFT
again to re-scan
7