Garmin FUSION APOLLO RA770 Quick Start Manual page 4

Source name
Active zone, status icons, and shortcuts
Track details (if available)
Album art (if available from a compatible source)
Elapsed time, track duration, and the current track number out of the total
number of tracks in the playlist (if available)
Naming the Device
You should enter a unique name for this device so you can easily identify it
when viewing devices on the Fusion PartyBus network.
1 Select > SETTINGS.
2 Select DEVICE NAME, and enter a unique name for the device.
Setting the Home Zone
1 Select > SETTINGS.
2 Select a zone.
Adjusting the Volume
1 Turn the dial to adjust the volume for the home zone on the stereo.
2 If necessary, press the dial to switch between zones.
NOTE: If this stereo is part of a group, you can adjust the volume of all
stereos in the group or individual zones on each stereo (page 4).
TIP: You can press and hold the dial to adjust the subwoofer level of a zone.
Creating or Editing a Group
Before you can create a group, you must connect multiple compatible stereos
to the Fusion PartyBus network. See the installation instructions provided with
your stereo for installing and configuring the network.
4
You can combine compatible stereos on the network into groups. Grouped
stereos can share available sources and control media playback and volume
on all of the stereos in the group, which allows for a synchronized audio
experience across the vessel. You can quickly create, edit, and break up groups
as needed from any compatible stereo or remote control on the network.
NOTE: You can adjust the volume of any zone on any compatible stereo on the
network, regardless of whether or not those stereos are in the group.
A zone stereo, such as the Apollo SRX400, can create or join a group to control
™
and play sources from other stereos, but it cannot share its sources with the
group.
You cannot change the settings when a stereo is part of a group.
For additional considerations about groups and sharing sources, see the
owner's manual.
1 Select > GROUPS.
TIP: You can hold from any screen to open the GROUPS menu.
2 Select the name of the stereo you want to be the primary stereo in the
group, or select the name of an existing group.
3 Select the stereos you want to add to or remove from the group.
4 Select DONE.
Selecting a Source
1 Select .
2 Turn the dial to highlight a source.
NOTE: If the device is part of a group, continue turning the dial to access the
sources on other devices in the group (page 4).
If a source cannot be shared with the group, it will appear gray and you
cannot select it.
3 Press the dial to select the source.
DRAFT
Quick Start Manual