Related Manuals for YAMIT F-700TS HYDROCYCLON
Summary of Contents for YAMIT F-700TS HYDROCYCLON
- Page 1 F-700TS HYDROCYCLON Installation & Operation Manual Yamit Filtration & Water Treatment Ltd.. PO Box 232, Moshav Tnuvot, 428300 Israel. Tel: +972-4-6220006 Fax: +972-4-6220042 e-mail: yamit@yamit-f.com www.yamit-f.com...
-
Page 2: Table Of Contents
Table of Contents Pág. No. Description Application Features Technical Data Installation Sampling Calculating the quantity of the suspended solids International Warranty ALL RIGHTS RESERVED, THIS MANUAL AND THE INFORMATION CONTAINED ARE NOT ALLOWED TO BE USED WITHOUT WRITTEN PERMISSION FROM YAMIT FILTRATION... -
Page 3: Description
F700 Description The suspended solids sampler allows testing the quantities of suspended solids in water, as a step in a procedure of choosing appropriate filter for the application. Suspended solids are an important indicator of water quality. Knowing the amount of suspended solids in untreated water allows choosing the right filtration grade and screen area of the filter which will effectively treat the water, and will not require prolonged maintenance. -
Page 4: Technical Data
F700 4. Technical Specifications • Operating pressure: 2.5–5 bar [36.2-72.5 PSI]. • Flow rate – 1 m3/hr [4.4 U.S.GPM] (at operating pressure range). • Sampling time – 6 min. periods. • Inlet /outlet connector – 15 cm. [½"]. 5. Installation The suspended solids sampler requires a well mixed sample of untreated water, and unrestricted flow through the sampler. -
Page 5: Sampling
F700 6. Sampling 1. Verify correct installation of the sampler, according to instructions in previous chapter. 2. Verify that the sample tube is clean. 3. Verify that the supply line operates at desired conditions, i.e. there is an average amount of suspended solids for the application and the flow through the supply line is developed. -
Page 6: Calculating The Quantity Of The Suspended Solids
F700 7. Calculating the quantity of suspended solids The quantity of suspended solids is calculated using the following formula: Amount of accumulated suspended solids (ml) Suspended solids concentration (ppm) = Volume of water passed through the sampler (m Notes: 1. Volumes of water passing through the sampler for given time periods at a flow rate of 1 m3/h: Sampling time Water passed through the... -
Page 7: Ipb
F700 8. IPB Part Description Cat. No. Body Test tube 4820000010 O-Ring 4081020110 Elbow ½” BSP 4170056501 Connector “T” ½” BSP 4190056500 Bushing ½” *¼” BSP 4640112141 Pressure gauge 4400102502 Ball valve 4504005100-01 O-Ring 4081012100-112 Bushing ¾” BSP for Test tube 6126300701... -
Page 8: International Warranty
F700 9. International Warranty Yamit Filtration & Water Treatment Ltd. (hereinafter -" YAMIT") guarantees to the customers who purchased YAMIT ‘s products directly from E.L.I or through its authorized distributors, that such products will be free from defect in material...