Table of Contents
Advertisement
BASIC IMAGE RECORDING
Using the Flash
Perform the following steps to select the flash mode you
want to use.
• The approximate effective range of the flash is shown
below.
Wide Angle Optical Zoom:
Approximately 0.1 to 3.7 meters
(0.3´ to 12.1´) (ISO Sensitivity: Auto)
Telephoto Optical Zoom:
Approximately 0.6 to 1.9 meters
(2.0´ to 6.2´) (ISO Sensitivity: Auto)
* Depends on zoom factor.
1.
In the REC mode, press [ ] (
• Each press of [ ] (
mode settings described below on the monitor
screen.
[ ] (
)
).
) cycles through the flash
Flash mode indicator
To do this:
Have the flash fire automatically when
required (Auto Flash)*
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Always use soft flash, regardless of
exposure conditions (Soft Flash)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye reduction)
In this case, the flash fires automatically
when required
*
appears momentarily when you select Auto as
the flash mode, and then disappears.
2.
Press the shutter button to record the image.
63
Select this setting:
Advertisement
Table of Contents
