Pertronic PS1400 Installation Instructions

PERTRONIC INDUSTRIES LTD
PS1400 Sounder - Installation Instructions
Overview
The PS1400 Sounder is one of a range of sounders manufactured by Pertronic Industries.
The PS1400 Sounder is a modified PS1 sounder and generates tones equivalent to the
System Sensor PA400 sounder. The PS1400 is NOT AS2220 compliant.
The PS1400 Sounders have a maximum sound pressure level of 83dBA. The sound level
may be adjusted by a Volume control.
PS1400 Sounders are normally connected to the monitored Bell or sounder circuit of a
Fire Alarm Panel and are activated when the sounder circuit voltage polarity is reversed
in the 'Alarm' state.
The PS1400 Sounders may be mounted in a standard single-gang electrical flush-box
fitting, and are supplied with a protective plastic cover for installation and building
construction use.
Specification
Dimensions:
Colour Options:
Sound Level Output:
Power Requirements:
Quiescent current (Non-Alarm state)
Operating current (Alarm state)
Controls:
Volume Control:
Pertronic Industries Ltd
117 x 74 x 12
Designed to fit into a standard electrical flush-box fitting.
Red or White.
Sound pressure level at 1m (peak  3dB)
Evacuation, Alert:
BELL IN terminal (Supplied from the Bell circuit):
Operating Voltage 9.5Vdc to 30Vdc
0.2A
0.4A
8mA average, 12mA peak
14mA average, 22mA peak
Third wire for 'Alert' / 'Evacuation' tone control
0V for the 'Alert' tone.
Potentiometer to adjust sound output level – range = 20dB.
1
H x W x D mm
95dBA
98dBA
0300- PS1400 Sounder Issue 4.0 20220331
Depth above flush-box.
(@12Vdc)
(@24Vdc)
(@12Vdc)
(@24Vdc)
(@12Vdc)
(@24Vdc)