TRAMEX CME5 Manual

TRAMEX CME5 Manual

Concrete moisture encounter 5
Hide thumbs Also See for CME5:

Advertisement

Tramex CME5 Concrete Moisture Encounter 5
The Tramex Concrete Moisture Encounter 5 (CME5) is a non-destructive analog moisture meter for concrete floors and
slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline.
The CME5 also provides Carbide Method equivalent readings for concrete and other cementitious substrates as well as
comparative readings as per ASTM F2659
The Concrete Moisture Encounter detects and evaluates the moisture conditions within the slab or screed by non-
destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under
test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture
present in the material.
The Concrete Moisture Encounter determines the strength of the current and converts this to a moisture content value for
concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear analog dial.

Features

Non-destructive in operation with no need to probe, drill or mechanically damage the surface.
Clear easy-to-read analogue dial.
Instant and precise readings to a depth of approximately 20mm into the slab.
Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of
apps and reporting.
Hold function "freezes" meter reading when inspecting areas where the meter face is not visible, and for easy
recording of data.
Reproducible and reliable results.
CM Carbide Method moisture content equivalent readings.
Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
Rugged ergonomically designed enclosure.
Conforms to: ASTM F2659
BAMR (Pty) Ltd, 4 Palm Street, Newlands, 7700, South Africa
Ph: 021 683 2100, WhatsApp: 079 998 6527
sales@bamr.co.za, www.bamr.co.za, www.gaugeit.co.za
Page 1 of 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CME5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TRAMEX CME5

  • Page 1 Tramex CME5 Concrete Moisture Encounter 5 Conforms to: ASTM F2659 The Tramex Concrete Moisture Encounter 5 (CME5) is a non-destructive analog moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline.
  • Page 2 Wrist Strap Instruction Manual How it works The Tramex Concrete Moisture Encounter detects and evaluates the moisture conditions within the slab or screed by non- destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument.

Table of Contents