Non-destructive moisture & humidity meter (43 pages)
Summary of Contents for TRAMEX CME4
Page 1
Battery is low and will soon need to be replaced with an Alkaline battery. CME4 Single LED flashing and meter frozen. CME4 is in HOLD mode. Press HOLD button to release. Concrete Moisture Encounter USER GUIDE ONLINE Please use the following link or QR code to access the complete User Guide online: http://l.ead.me/bav1ez...
Page 2
To freeze readings press the HOLD button once. In HOLD mode the upper LED will flash continu- ously. If CME4 is shut down in HOLD it will retain the stored reading when powered up next and CALIBRATION & WARRANTY remain in HOLD with the upper light flashing...
Need help?
Do you have a question about the CME4 and is the answer not in the manual?
Questions and answers