Trouble Shooting Guide - Godrej EDGE COOLBLAST Series User Manual And Warranty Card

TROUBLE SHOOTING GUIDE

Trouble
No discharge
of air
Water leakage
Not cooling
Low Air
Flow/Delivery
*Unit does not
respond to
remote control
Shock on
cooler
Error Code (selected display models only)
E1
E2
We recommend customer to contact Customer Care for Technical Assistance.
(Refer Page no. 23)
Possible cause
Cord is unplugged
Loose contact at socket
Drain plug is displaced
overflow hole
Low or no water in the tank
Any other
The air vent is obstructed
Louver direction
Low voltage
*Weak remote
control batteries
*Not pointing the remote
towards control panel
Device malfunction
Solution
Make sure power cord is plugged in
and the supply switch is on and rectify
faulty wiring
Ensure to fill tank upto the
overflow hole
Refill the water in the tank
Contact service centre
Remove the foreign object from the
air vent/ Clean cooling pad
Adjust louvers according to
your requirement
Check voltage supply
*Check batteries, replace if needed
*Try operating using control panel
(Point towards Control Panel)
Contact service centre
Details
Grill Sensor Failure
Ambient Sensor Failure
(20) ^maV H$m nhbm Egr dmbm BÝìhQ> © a E`a Hw $ ba Q> o Š Zmo b m° O r