Advertisement
Quick Links
Operation Manual
Mobile Metal Band Saw
61917
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for XPOtool 61917
Summary of Contents for XPOtool 61917
- Page 1 Operation Manual Mobile Metal Band Saw 61917 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 61917 Page 2 The Tool Experts 05 2022-1...
- Page 3 • It is strictly forbidden to modify safety equipment or devices of the machine. • Resulting waste throughout the working process must be disposed of in compliance to current regulations. https://www.XPOtool.com Item 61917 Page 3 The Tool Experts 05 2022-1...
- Page 4 The description specifies the use for which this product has been designed and built. Any other use or failure to comply with the technical parameters listed below may lead to hazardous situation including the risk of injury to people and property. https://www.XPOtool.com Item 61917 Page 4 The Tool Experts 05 2022-1...
- Page 5 Fasten the blade arm in its end position using the mechanical lock provided (Fig. 2, ref. 2). • Make sure that it is properly fastened, grasp the centre of the arm (Fig. 2B), and lift it carefully. https://www.XPOtool.com Item 61917 Page 5 The Tool Experts 05 2022-1...
- Page 6 Operator position • The placement of the machine in relation to the operator position must allow observing the re- sults of the operation to maintain safety. https://www.XPOtool.com Item 61917 Page 6 The Tool Experts 05 2022-1...
- Page 7 During the first 4–6 cuts (after replacing the blade), only perform slight cutting pressures to in- crease the duration and effectiveness of the blade thereafter. After each working shift Carefully clean all parts of the machine to remove shavings and cutting residue. https://www.XPOtool.com Item 61917 Page 7 The Tool Experts 05 2022-1...
- Page 8 Check the length of the electric motor brushes and make sure they are efficient. If they are less than 6 mm long, they must be replaced with original new ones. • The gear transmission requires no maintenance since it runs on long life lubricants. Figures and illustrations https://www.XPOtool.com Item 61917 Page 8 The Tool Experts 05 2022-1...
- Page 9 Item 61917 Page 9 The Tool Experts 05 2022-1...
- Page 10 D-52249 Eschweiler Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 61917 Page 10 The Tool Experts 05 2022-1...
Need help?
Do you have a question about the 61917 and is the answer not in the manual?
Questions and answers