Table of Contents
Advertisement
Quick Links
WARNING
Please read carefully before proceeding with installation. Your failure to follow any
attached instructions or operating parameters may lead to the product's failure.
Keep this manual for future reference.
H2iQ™ Series
Installation and Operation Manual
Wireless Leak Sensor
Model: AU001
© 2019 Watts Water Technologies, Inc
.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Watts H2iQ Series
Summary of Contents for Watts H2iQ Series
- Page 1 Wireless Leak Sensor Model: AU001 WARNING Please read carefully before proceeding with installation. Your failure to follow any attached instructions or operating parameters may lead to the product’s failure. Keep this manual for future reference. © 2019 Watts Water Technologies, Inc...
-
Page 2: Table Of Contents
1. Important Safety Information It is your responsibility to ensure that this system is safely installed according to all applicable codes and standards. Watts is not responsible for damages resulting from improper installation and/or maintenance. This symbol identifies hazards which, if not avoided, could result in death or serious injury. -
Page 3: Product Description
2. Product Description The H2iQ wireless leak sensor is a radio frequency (RF) water leakage detector designed to link with the H2iQ E800 All-in-One Whole Home Water Management System, providing peace of mind and protection against costly water damage. If a leak is detected, the unit will produce both audible and visual alarms. When paired with the H2iQ E800 system, it will also send email and text notification and can prompt the system to shut off water automatically, preventing a potentially dangerous and destructive situation. -
Page 4: Operation
The LED on the top of the sensor will blink red when the battery is low and needs to be replaced. NOTICE Watts does not recommend rechargeable batteries. For best results use alkaline batteries. Sensor Setup Installing the Batteries 1. -
Page 5: Activating The Sensor
Activating the Sensor 1. To activate the leak sensor, press the button located in the center of the top of the unit for 5 seconds. You will see a green blinking LED light below the button, indicating that the sensor is operational but not paired with an H2iQ All-in-One Whole Home Water Protection System yet. -
Page 6: Led Indicator
5. Tap Pair Sensor, then type a name or location for the sensor and tap Enter. 6. Press the button on the top of the leak sensor to complete the process. You have 30 seconds to link the H2iQ E800 system to the sensor before it returns to normal. - Page 7 • You will hear the sensor’s audible alert. • The light on the top of the sensor will blink red and green. • The display screen on the H2iQ E800 will indicate a leak, and the system will shut off the water. To silence the audible alert, do one of the following: •...
-
Page 8: Leak Sensor Error
Leak Sensor Error A solid red light on the sensor indicates an error has occurred. Typically, this is due to an issue with the sensor, its circuit board, or both. If this occurs, replace the sensor. Unpairing a Leak Sensor If you have a leak sensor which you need to replace or no longer want to monitor, you can unpair it from the H2iQ E800 system as follows. -
Page 9: Technical Information
4. Technical Information Operating Temperature 32°F to 104°F (0°C to 40°C) Storage Temperature -4°F to 122°F (-20°C to 50°C) Operating Humidity 0 to 100% humidity Batteries 2 AA (included) Weight 3.5 oz (100 g) without batteries Size Diameter: 3⅜ inch (85 mm) Height: 1 11/16 inch (43 mm) RF Range 915 MHz... -
Page 10: Limited Warranty
5. Limited Warranty Watts (the “Company”) warrants the H2iQ E800 Wireless Leak Sensor (the “Product”) to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
Need help?
Do you have a question about the H2iQ Series and is the answer not in the manual?
Questions and answers