Temperature Control - XTM CFR1010XTM Manual

TE MPERATURE C ON TR OL
When your fridge/freezer is first connected to the
DC power input the appliance will automatically
switch on and the LCD control panel will display the
current cabinet temperature, Battery Protection and
Cooling Speed setting as well as the current input
voltage.
+ The Temperature Controller provides the ability
to set the desired temperature level and display
the current cabinet temperature. The electronic
controller has been programmed to maintain an
average of the set temperature.
+ The compressor will start up when the internal
cabinet temperatureincreases 0.5 to 1.5 degrees
above the set temperature and will run until the
temperature is 0.5 to 1.5 degrees below the set
temperature.
B ATT ERY PROTEC TION
S ET TING
1. Fridge to automatically restart once input voltage
is reached and is to retain all original settings
prior to monitor being activated.
2. Audible beeping to be heard when monitor is
activated.
1 2 V DC INP UT CUT O UT
HIGH 11.1V
MEDIUM 10.1V
LOW 9.6V
2 4 V DC I NPUT CUT O UT
HIGH 24.3V
MEDIUM 22.3V
LOW 21.3V
C U T IN
12.4V
11.4V
11.6V
C U T IN
25.7V
23.7V
22.7V
8