On a Flat Surface
On a Flat Surface
On Top of a Series 50 Mobile Cart or 8040A
46
The receiver can be rested on, but not fixed to, a flat surface such as a
work surface.
1. Move the mounting cam on the base of the receiver to the left.
2. Slot the feet on the base of the receiver into the slots on the 8040A
monitor or Series 50 mobile cart.
3. Secure the receiver in place by turning the mounting cam into the
lock position.
The actual appearance of the mobile
cart may differ from the one shown.
Chapter 8 - Mounting the Receiver
For 8040A