Table of Contents
Advertisement
Adjustments & Settings
Bluetooth®
This instrument supports wireless connection to smart devices such as smartphones and tablets.
Availability of Bluetooth function dependent on market location.
▋ Bluetooth settings
This function can be turned on and off.
Turn on the Bluetooth function of this instrument and enable
Bluetooth communications of the smart device application near
the instrument.
▋ Bluetooth settings
Type
Bluetooth MIDI
Bluetooth Audio
• For more detailed instructions regarding Bluetooth pairing, please refer to the supplementary Bluetooth® Connectivity
Guide manual, available from the Kawai Global website: http://www.kawai-global.com/support/manual.
• Only one smart device can be connected to the piano's Bluetooth MIDI or Bluetooth audio at a time.
Bluetooth® Audio Volume
This function allows players to adjust the volume of music stored in smart devices, which is output from
the instrument's speakers.
After adjusting the volume on the smart device or using the [MASTER VOLUME] slider, this function can
be used to fine tune the volume.
Availability of Bluetooth function dependent on market location.
The display shows "Bluetooth Vol".
▋ Adjusting the audio volume
The value can be adjusted in the range from -15 to +15.
28
Description
When using a smart device app that supports
Bluetooth MIDI, this function allows the instru-
ment to be controlled by an app, or send/receive
MIDI data wirelessly.
This function allows audio from the connected
smart device (such as songs, videos, etc.) to
be played through the instrument's speakers
wirelessly.
Connection method
Enable the smart device's Bluetooth function,
launch an app that supports Bluetooth MIDI, then
select "CN201 MIDI" from the app's connection
setting screen.
Enable the smart device's Bluetooth function, then
select "CN201 Audio" from the device's Bluetooth
connection setting screen.
If "CN201 Audio" does not appear, press and hold
the [1] and [2] buttons on the instrument's control
panel while the Home screen is shown in the
display.After pairing successfully, the instrument
will automatically reconnect to the smart device
when the power is turned on.
Advertisement
Table of Contents
