JARDINICO JCP.4 Series Assembly And Adjustment

Hide thumbs Also See for JCP.4 Series:

Download this manual

JCP.4 SERIES

FREE POLE

ASSEMBLY AND

OPERATION GUIDE

Table of Contents

Page 1 JCP.4 SERIES FREE POLE ASSEMBLY AND OPERATION GUIDE...
Page 2: General Guidelines
GENERAL GUIDELINES JCP.4 SERIES · Jardinico Caractère highly recommends that no umbrella, regardless of size or weight, ever be left unattended in the open position. In windy conditions, it is further recommended that umbrellas be closed, removed from their base, and stored, or laid horizontally.
Page 3 ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS Two-person team is recommended for assembly. Remove all packaging from the umbrella. INSTALLING INTERNAL STEM OPEN THE UMBRELLA · Lay umbrella on soft clean surface. Attach finial to canopy structure. · Remove the strap that holds the canopy structure to the mast when in the closed position.
Page 4 TILT FRONT / BACK CLOSE THE UMBRELLA · Turn adjustment knob counter clockwise and slide car upward or downward · Bring canopy to 0° (horizontal) tilt position. until desired tilt degree of shade is reached. Tighten knob by turning clockwise ·...
Page 5: Maintenance
· Once rolled tight, pull adjacent panels out one at a time and fold to the center, Jardinico Caractère recommends weekly or biweekly cleaning with mild soap alternating sides until all the panels have been pulled out from the arms and and water to remove the concentrated deposits and protect the powder coat folded into the center.
Page 6: Warranty
Jardinico and stainless steel hardware only. If there Caractère in Baldwin Park, CA. All warranty...

Jcp.401Jcp.402Jcp.403Jcp.404