Snmp Ip Traps - Paxar 9825 Operating Instructions Manual

SNMP IP Traps

1. From the Alerts and Traps screen, click SNMP IP Traps.
2. Enter a community name, IP address, and the errors you wish to receive
notification for. You can enter up to eight IP addresses.
3. Click Submit.
4. Click the reset link at the bottom of the screen. The Reset Server screen
appears.
5. Click Submit and wait five seconds for the printer to reset. Even though
you submitted your changes on the previous screen, they do not take
effect until you reset the printer.
You must re-enter your access password to make any further changes to
the printer settings.
4-14 Ethernet Operating Instructions