Table of Contents
Advertisement
(1) Open the battery
compartment cover.
Lift the cover while
pushing down the clip.
[Regarding Batteries]
● We recommended use of commercially sold AAA alkaline batteries.
● Although rechargeable nickel–metal hydride batteries can also be used, doing so may
result in decreased operating time.
● When not using the device for long periods of time, store it after first removing the batteries.
[Estimated Battery Life]
When using AAA alkaline batteries, the estimated battery life when used 1 hr. per day is
approximately one month.
* Battery life will depend upon usage conditions and usage environment factors such as
temperature.
Continue pressing the ON/OFF button for approximately 2 seconds.
⇒ You will hear two electronic beeps, meaning the power is on.
[Auto Power-Off Function]
With this function, the power will automatically turn off if no measurements are performed or no
buttons are operated for approximately 10 minutes, despite the ON/OFF button not being pressed.
* Power can be turned on without operating the auto power-off function by pressing the
ON/OFF button continually for 2 seconds while pressing the MODE button. In this case,
"OFF" will be shown on the screen for approximately 1 second, after which it will return to
the normal screen.
Continue pressing the ON/OFF button for approximately 2 seconds.
⇒ You will hear one electronic beep, meaning the power is off.
Inserting Batteries
(2) Insert the batteries.
Check the direction of
the batteries and insert
them one at a time.
Turning On the Power
Turning Off the Power
(3) Close the cover.
6
Insert the lower tabs into
the grooves and press
down the cover.
Hide quick links:
Advertisement
Table of Contents
