PRGR HS-130A User Manual page 4

・ Do not use in environments where water could permeate the device, such as in rain. (Doing
so could cause the device to malfunction as it is not waterproof. Also, be aware that any
malfunctions caused by water permeation are not covered by warranty.)
・ This device is a precision instrument. As such, do not store it in the following locations. (Doing
so could result in discoloration, deformation, or malfunction.)
● Locations subject to high temperatures, such as those subject to direct sunlight or near heating
equipment
● On vehicle dashboards or in vehicles with windows closed in hot weather
● Locations subject to high levels of humidity or dust
・ Do not drop the device or subject it to strong impact. (Doing so could result in damage or
malfunction.)
* Particular caution is necessary in the case of the LCD, which could be damaged by such
impact.
・ Do not place heavy objects on the device or sit/stand on it. (Doing so could result in injury,
damage, or malfunction.)
・ Do not apply pressure to this device while stowed inside caddy bags or other types of bags.
(Doing so could result in housing or LCD damage or malfunction.)
・ When not using the device for long periods of time, store it after first removing the batteries.
(Failure to do so could result in battery fluid leakage, which may cause malfunction.)
・ Do not attempt to operate the buttons using objects such as golf clubs. (Doing so could result
in damage or malfunction.)
・ Using this device near other radio devices, televisions, radios, or computers could cause this
device or those other devices to be affected.
・ Using this device near equipment with drive units such as automatic doors, auto tee-up
systems, air conditioners, or circulators could result in malfunctions.
・ Do not grip the sensor part of this device with your hands or bring reflective objects such as
metals near it as doing so could cause the sensor to malfunction.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution
3