Table of Contents
Advertisement
DO NOT use an outlet
controlled by a wall switch.
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, charge the battery
(refer to "Charging the
Battery Pack," page 11).
All manuals and user guides at all-guides.com
3) Plug the AC adapter cord into the 10 V DC input jack on the back of
the base.
4) Put the AC adapter cord inside the
molded wiring channel, then wrap it
around the strain relief notch. Plug
the AC adapter into a standard 120 V
AC wall outlet.
5) Plug one end of the short telephone
cord into the
TEL LINE
the back of the base, then plug the
other end into a standard
telephone jack.
6) Line up the mounting slots on the base
with the mounting posts on the wall,
then push in and down until the
phone is firmly seated.
jack on
5
Advertisement
Table of Contents
