Adjusting Trimmer For User - Stihl FR 235 Instruction Manual

Table of Contents

Advertisement

7 Adjusting Trimmer for User

► Rotate the mowing head (1) counterclockwise
until the stop pin (4) engages in position.
The shaft is now blocked.
► Tighten down the mowing head (1) firmly by
hand.
► Remove the stop pin (4).
6.8.2
Removing the Mowing Head
► Shut off the engine.
► Insert the stop pin in the bore as far as stop
and hold it depressed.
► Rotate the mowing head until the stop pin
engages in position.
The shaft is now blocked.
► Unscrew the mowing head clockwise.
► Remove the thrust plate.
► Remove stop pin.
6.9
Removing and Installing Metal
Cutting Attachment
6.9.1
Mounting the Metal Cutting Attach‐
ment
► Shut off the engine.
► Place the thrust plate (5) on the shaft (6) so
that its smaller diameter faces up.
► Place the metal cutting attachment (4) on the
thrust plate (5). If you are fitting a grass cutting
blade with more than 4 cutting edges: Its cut‐
ting edges must face in the same direction as
the arrow on the deflector.
► Place the thrust washer (3) on the metal cut‐
ting attachment (4) so that its raised side faces
up.
► Place the rider plate (2) on the thrust washer
(3) so that its closed side faces up.
0458-527-0121-B
► Insert the stop pin (7) in the bore as far as
► Rotate the metal cutting attachment (4) coun‐
► Fit the nut (1) counterclockwise and tighten it
► Remove the stop pin (7).
6.9.2
► Shut off the engine.
► Insert the stop pin in the bore up to the limit
► Rotate the metal cutting attachment clockwise
► Unscrew the mounting nut clockwise.
► Remove the fastening parts, metal cutting tool
► Remove the stop pin.
7.1
1
2
► Put the carrying system on your back.
3
4
5
6
► Close buckle (1) on the waist belt.
7
► Tighten the straps until the waist belt fits
► Thread the end of the waist belt through the
stop and hold it depressed.
terclockwise until the stop pin (7) engages in
position.
The shaft (6) is now blocked.
down firmly.
Removing the metal cutting attach‐
ment
stop and hold it depressed.
until the stop pin engages in position.
The shaft is now blocked.
and pressure plate.
7
Adjusting Trimmer for User
Fitting and Adjusting the Carry‐
ing System
snugly on your hips and the back padding is
against your back.
loop (2).
English
1
2
13

Advertisement

Table of Contents
loading

Table of Contents