Removal steps
Step
Screw (quantity)
2
M1.6 × L2.4 mm, flat-head, nylon-coated (4)
1060 Volume board and cable
For access, do the following :
1. Remove these FRUs:
• "1010 LCD module" on page 59
• "1020 Built-in battery" on page 61
2. Disconnect the pogo pin cable from the system board. See "1050 Pogo pin cable" on page 64.
Color
Torque
Silver
0.098 Nm
(1.05 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
65