Table of Contents
Advertisement
Changing the USB Port Protocol
You can use the procedure below to change the USB
communication protocol that is used when exchanging data with
a computer, printer, or other external device. Select the protocol
that suits the device to which you are connecting.
1.
Press [MENU].
2.
On the "Set Up" tab, select "USB" and then
press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
When you want to connect to this type
of device:
Computer or a printer that supports USB
DIRECT-PRINT (page 202)
With this setting, the computer sees the
camera as an external storage device.
Use this setting for normal transfer of
images from the camera to a computer
(using the bundled Photo Loader with
HOT ALBUM application).
Printer that supports PictBridge (page
202)
This setting simplifies the transfer of
image data to the connected device.
198
Select this
setting:
Mass Storage
(USB DIRECT-
PRINT)
PTP
(PictBridge)
OTHER SETTINGS
Advertisement
Table of Contents
