Type Designation And Serial Number; Ce Marking; Hot Water Association; Set-Up - Vaillant aroSTOR VWL B 200/5 UK Installation And Maintenance Instructions Manual

3.4

Type designation and serial number

1
The type designation and serial number are on the data plate
(1).
3.5

CE marking

The CE marking shows that the products comply with the
basic requirements of the applicable directives as stated on
the declaration of conformity.
The declaration of conformity can be viewed at the manufac-
turer's site.
3.6

Hot Water Association

Vaillant is a full member of the Hot Water Association and
promotes the scheme in association with its cylinder range.
Details are available on the web site www.vaillant.co.uk
4

Set-up

4.1 Transporting the product to the installation
site
When being transported, the product must ideally be in a
vertical position. It must only be placed in a horizontal posi-
tion at the front, as specified on the packaging, if the height
of the vehicle is lower than the height of the product.
8
4.2

Carrying the product

Caution.
Risk of material damage caused by incor-
rect handling.
The product's upper covering hood is not
designed for loading and must not be used
for storage.
▶
Do not lift the product by the top covering
hood when transporting it.
Warning.
Risk of injury from lifting a heavy weight.
Lifting weights that are too heavy may cause
injury to the spine, for example.
▶
When transporting the product, lift it with
the help of a second person.
▶
Observe the product weight stated in the
technical data.
▶
When transporting heavy loads, observe
the applicable directives and regulations.
1. Transport the product to the installation site using a
fork-lift truck or pallet truck.
2. Transport the product in the upright position only.
3. Carry the product to the final installation site in the
transport bag supplied.
Note
The transport bag must be kept away from
children in order to prevent the risk of suf-
focation.
Installation and maintenance instructions 0020285063_05