Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ACME LED-LGP60
Summary of Contents for ACME LED-LGP60
- Page 1 LED‐LGP60 User Manual Please read the instruction carefully before use ...
- Page 2 CONTENTS 1. Safety Instructions....................2 2. Technical Specifications ....................3 3. How To Set The Unit ....................4 3.1 Control Panel ......................4 4. Troubleshooting......................5 5. Fixture Cleaning......................5 ...
- Page 3 1. Safety Instructions Please read the instructions carefully which includes important information about the installation, operation and maintenance. WARNING PLEASE keep this User Manual for future consultation. If you sell the fixture to another user, make sure that they also receive this instruction booklet. PLEASE unpack and check carefully there is no transportation damage before using the fixture. It’s important to ground the yellow/green conductor to earth in order to avoid electric shock. PLEASE disconnect mains power before servicing and maintenance. Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher than this. In the event of serious operating problem, stop using the fixture immediately. Never try to repair ...
- Page 4 Caution: There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer. Installation: The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. And make sure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. ...
- Page 5 3. How To Set The Unit 3.1 Control Panel 1. Fuse (T 2.0A): To protect the unit from the damage of over‐current; 2. POWER OUT: To connect to supply power to the next unit; 3. POWER IN: To connect to mains supply power; 4. Dimmer: Manually adjust dimmer; 5. Rotation: Manually adjust the rotation direction, speed and stop rotation. ...
- Page 6 4. Troubleshooting If the fixture does not work, no light, please check the connection of power cable, also measure the mains voltage on the main connector 5. Fixture Cleaning The cleaning must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: moist, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the fixture. Clean with soft cloth using normal glass cleaning fluid. Always dry the parts carefully. Clean the external optics at least every 30 days. ...
- Page 7 Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55103‐1: 2009 ; EN55103‐2: 2009; EN62471: 2008; EN61000‐3‐2: 2006 + A1:2009 + A2:2009; EN61000‐3‐3: 2008. & Harmonized Standard EN 60598‐1:2008 + All:2009; EN 60598‐2‐17:1989 + A2:1991; EN 62471:2008; EN 62493: 2010 Safety of household and similar electrical appliances Part 1: General requirements ...
- Page 8 Innovation, Quality, Performance ...
Need help?
Do you have a question about the LED-LGP60 and is the answer not in the manual?
Questions and answers