Setting The Functions - Panasonic AW-RP50N Operating Instructions Manual

Setting the functions

This section describes how the unit's functions are set.
The following functions can be set.
  Setting of the remote camera operations
  Registration of functions in the USER buttons
  Setting the speed at which to move to the preset memory
setting position
  Setting the control items used when preset data is
executed
  Controlling the peripheral devices connected to the
remote cameras
• ND filter
• AC adapter
(AW-PS300A)
• Defroster
  Assignment of preset data when emergency interrupts
occur
  Locking of button operations
The settings are established using the [SETUP] menu.
First, the basic menu operations will be described.
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set the PRESET MEMORY/MENU 9 button
(SETUP) to ON.
When the button is pressed and its indicator lights, the
[SETUP] menu is displayed on the LCD panel.
[ 1 ] U SE R
3
Turn the F1 dial to display the target menu
item, and press the F1 dial.
For details on the [SETUP] menu items, refer to the
"Table of menu items".
[ 4 ] O PE R AT E
1 . P A N D IR
• Wiper
• Heater, fan
• Halogen lamp
▼
Press the F1 dial.
▼
N OR M A L
4
Turn the F1 dial to select the target menu item.
1. P A N D IR
2. T I L T DI R
5
Turn the F2 dial to select the setting.
Then press the F2 dial to change the setting.
2. T I L T DI R
2. T I L T DI R
18
▼
N O R M A L
Turn the F1 dial.
N O R M A L
N O R M A L
Turn the F2 dial, and then press
it.
R E V E R S E