Tcp Server Test In Sta Mode - HF Elfin-EW10 Operation Manual

HF2211S_EW1X_PW1X
the product works in STA mode and connect to router.
Note: This method is very easy to config, but may encounter failure sometimes. Do as
following to try again.
Check if phone connect to 2.4G router SSID.
➢
Set router 2.4G Wi-Fi to 802.11bg
➢

5.4. TCP Server Test in STA Mode

Open TCP&UDP test tool and generate TCP connection as following steps. Device has
already created a TCP Server(port 8899) for use. TCP&UDP test tool can be downloaded
from the website:
DestIP：Destination IP address.
➢
Port：Destination Port.
➢
http://www.hi-flying.com/
Operation Guide
- 27 -